Issue link: http://alpine.uberflip.com/i/126813
HTF HTFR HEAVY TOP FLANGE JOIST HANGERS Design Features . . the addition of a top flange meets specifications for schools and public buildings, where added strength, support, and safety are prime requirements. Two design styles are available for applications and load-bearing flexibility. Stock No. Design Configuration HTF ( ) Standard HTF ( ) R Reversed face flange (turned in) for 3xs and larger joist sizes 2xs, 3xs, 4xs, 6xs, 8xs, double 2xs, triple 2xs, 3¹⁄₈" and 5¹⁄₈" glulam . . also available on special order for rough beam and larger glulam sizes. When ordering, specify the W, D and H dimensions. Material . . 12 ga. galvanized steel. Loads . . two-plane nailing schedule offers extra support and load strength where mechanical vibration is a factor. Skewed and Sloped Hangers . . (see page 43) available, specify angle (67¹⁄₂° max.) and whether left or right, up or down. Not available in HTF( )R reversed flange styles. Due to the infinite variety of custom orders, skewed hangers and sloped hangers are not code evaluated. Design loads of the nearest equivalent hanger should be used as a general guide, subject to specific engineering designs. HTF412 Top View – Skewed Left Sloped Down HTFR412 (Reversed) Skewed Left PANELIZED ROOF HANGERS PANEL HANGERS/PANEL PH HANGERS GRIP LOCK PHG Design Features . . are specifically PHLTF engineered for the panelized roof construction PHGLTF industry where it is standard procedure to nail 2¹⁄₂" (PHG24, PHG26) 3¹⁄₂" (PHG34, PHG 36 4" (PH24-2, PH26-2) 4¹⁄₂" (PH44, PH46) 1¹ ₂" through the (plywood) sheathing and through the PHG hanger top flange, using one 10d x 2¹⁄₈" nail placed in the middle third of the top flange, no closer than ¹⁄₄" from the back edge of the hanger. The seat nail is non-structural and does not contribute to the load value. PHG – vertical grooves grip the stiffener without nails for faster, more economical prefabricated panels. Grip-lock panel hanger will not fall off during transportation or installation. 2xs, double 2xs, 3xs and 4xs. Material . . 18 ga. galvanized steel. Loads . . based on independent laboratory test results conforming to codes. Long Top Flange Hangers . . available only in 2x4 and 2x6 style to order and identified as PHG-LTF (example PHG26 with long top flange, specify as PHG26LTF). H W 18 www.itwbcghardware.com - 800.521.9790 TF 1¹ ₄" PHG26LTF ITW BCG Hardware