Alpine

SPECIAL AND CUSTOM JOIST HANGERS HAYWARD NAIL PATTERN OR HNP UPLIFT UPLIFT HANGERS Design Features . . both the R or the RS (U) series can be modified for the HNP uplift . . provides header or face nailing with additional purlin nailing. Recommended for areas that require additional nailing for higher uplift loads. A torsional rotation strap may also be supplied to modify the R or the RS series hangers and is recommended to counter rotation problems for hangers 18" and deeper. The strap also acts as a stiffener to eliminate buckling in the "U" strap. HNP modifications have been tested by independent laboratory tests conducted in accordance with code criteria, with a minimum safety factor of three. Loads . . for the RS4HNP, see pages 20 and 21; for the RA4HNP, see pages 22 and 23. Ordering Information . . to order hangers other than HNP, start with stock no. RH 3.25/19¹⁄₂, add "U" after standard stock description RHU 3.25/19¹⁄₂ for uplift call out. RAU 3.25/H = 19¹⁄₂" With Torsional Strap – 10d Nails or Plywood Nails Material ³⁄₁₆" x 2" x 7" ( ¹⁄₄" x 2¹⁄₂" x 10" ) RS414-HNP 16d Nails for Both Header and Joist RA412-HNP Accepted with 10d Nails or Plywood Nails MBHG MASONRY BEAM HANGERS MODEL NUMBER GALVANIZED Design Features . . the MBHG is a single piece, non-welded connector available for solid sawn, truss and engineered wood products. The only skew for the MBHG is a standard 45° either right or left. The maximum allowable download is 3505 lbs and 1585 lbs uplift for height 7.25. For all other models, use the table listed download and uplift. Material . . 10 ga. galvanized steel. REF NO HEADER TOP FACE MBHGR Skewed Right 45° SOLID CONCRETE DESIGN LOADS (LBS) FASTENERS PRODUCT CODE GROUTED CMU DESIGN LOADS (LBS) JOIST UPLIFT (133) MAX DOWN LOAD UPLIFT (133) MAX DOWN LOAD MBHA 1-ATR ³⁄₄ x 8 1-ATR³⁄₄ x 8 18-10d 3180 6065 3180 5500 MBHA with H = 7¹⁄₄ 1-ATR ³⁄₄ x 8 1-ATR³⁄₄ x 4³⁄₄ 18-10d 2000 4410 2000 4410 MBHG MBHG with H = 7¹⁄₄ RM MBHG Typical Applications MBHG3.12/9.25 MBHG3.12/11.25 MBHG3.56/7.25 MBHG3.56/9.25 MBHG3.56/11.25 MBHG3.56/11.88 MBHG3.56/14 MBHG3.56/16 MBHG3.56/18 MBHG5.50/7.25 MBHG5.50/9.25 MBHG5.50/11.25 MBHG5.50/11.88 MBHG5.50/14 MBHG5.50/16 MBHG5.50/18 DIMENSIONS W 3¹⁄₈ 3¹⁄₈ 3⁹⁄₁₆ 3⁹⁄₁₆ 3⁹⁄₁₆ 3⁹⁄₁₆ 3⁹⁄₁₆ 3⁹⁄₁₆ 3⁹⁄₁₆ 5¹⁄₂ 5¹⁄₂ 5¹⁄₂ 5¹⁄₂ 5¹⁄₂ 5¹⁄₂ 5¹⁄₂ D 9¹⁄₄ 11¹⁄₄ 7¹⁄₄ 9¹⁄₄ 11¹⁄₄ 11⁷⁄₈ 14 16 18 7¹⁄₄ 9¹⁄₄ 11¹⁄₄ 11⁷⁄₈ 14 16 18 MASONRY HANGERS Design Features . . duplex nails installed in the top flange act as anchorage into an 8" concrete block or concrete wall construction. Loads . . generally the same as for the R or RA hangers (pages 22 and 23). LOAD DIRECTION Down Down Down Down % OF DESIGN LOAD 100 100 100 50 VARIATION SKEWED SLOPED COMBINATION OFFSET RM412 RM412 Finish . . SUPERSPEED gray paint. Typical Application (Masonry) CONCEALED HARDWARE Post Cap Purlin Hanger Purlin to Header Post Anchor (Square Post) Concrete to Post 100 Post Anchor (Round Post) Post to Beam For Added Corrosion Resistance We will hot-dip galvanize your order for those jobs which call out for that extra protection. In addition, all items are available in stainless steel material. www.itwbcghardware.com - 800.521.9790 ITW BCG Hardware

• Cover