Alpine AutoSet Plus Assembly
Table/Gantry Specification Sheet
Connecting for the Future
Highly efficient
Labor saving
Trackless movement
Steel top
The AutoSet Plus computer-controlled jigging system is engineered to be accurate, efficient
and durable. The automated steel pucks give workers the ability to keep a consistent pace
throughout their shift with higher quality and lower employee fatigue. This fast, consistent
production means lower labor costs and quicker turnarounds.
General Specifications
Equipment Specifications
Gantry Roller Face Width 14 ft. 7 in.
Gantry Overall Width 18 ft. 7 in.
Gantry Travel Speed 140 in. /min.
Table Length (Per table) 7 ft. 1 in.
Table Width (Between Rails) 14 ft. 3 in.
Maximum distance
between top and bottom
automated pucks
12 ft. 6 in.
Truss Jigging Setups/Groups 1 to 4 groups per system
Air Requirement
2 CFM per liftout at 100 PSI
(when activated, not a constant draw)
Operating Temperature 32° to 104° F
Amperage Requirements
480 V, AC, 3 Phase
(Customer must provide transformer
if other than 480V-3PH)
• 20 Amp per Gantry
• 15 Amp for the Controller Box
• 20 Amp per 16 Automated Axis
Foundation Requirement ≥6" thick reinforced concrete
For full specifications, maintenance requirements, and user instructions,
please refer to the product manual.