Framing the American Dream

March 13, 2015
Framing the American Dream®, a project sponsored by SBCA (formerly WTCA), individual component manufacturers, supplier companies, and the Building Systems Council of NAHB, featured two 2,600 square-foot homes built simultaneously. One was built using wood component systems framing, and the other fully engineered conventional stick framing. FAD side by sideIn this demonstration, builders spent 148 hours framing the home with components. In contrast it took 401 hours to construct the conventional home, 67% longer than framing with components. In the same way, 15,100 board feet were used to frame the component home, while 20,400 board feet of lumber were used to frame the conventional home, or 26% more lumber than in the component house. Scrap generated was 4 yards for the component home, and 17 yards for the conventional home. This project took place at the NAHB Show in Houston, Texas January 16 - 23, 1996. For more detail visit: http://www.sbcindustry.com/content/1/framing-american-dream http://www.nahb.org/generic.aspx?genericContentID=164336&fromGSA=1
Previous Video
Alpine 50 Years of Building Success
Alpine 50 Years of Building Success

From the start, Alpine’s team of experts, in partnership with their customers, have worked tirelessly to ma...

Next Video
ITW Instinct - Building Information Modeling
ITW Instinct - Building Information Modeling

Welcome to the Building Information Revolution! Introducing INSTINCT -- a collaborative workflow solution f...